1. ABS, PE, PP board and other boards are crushed and recycled.
2. The rectangular feeding port is specially designed for the crushing of plate materials, which is convenient for long strips of plates to be crushed and improves work efficiency. The optional suction fan and storage bucket can be used to form a plate crushing and recycling system, which can give full play to the recycling efficiency.
3. The sealed bearing is adopted to keep the bearing running well for a long time; the design of the knife shape is reasonable, the product is uniformly granulated; the knife seat is heat-shrinked, and the appearance design is beautiful and generous.
1. The structure of the blade knife is between the claw knife and the flat knife, and it is suitable for crushing plastic products such as ordinary sheets, pipes, profiles, plates and packaging materials.
2. The general-purpose plastic grinder adopts sealed bearings to keep the bearings running well for a long time; the blade design is reasonable, and the alloy steel blade is used to make the product uniform; Beautiful and generous.
1. It is suitable for crushing all kinds of small and medium-sized plastic pipes, such as PE, PVC pipes, silicon core pipes and other pipes for crushing and recycling.
2. The round tube-type feeding port is specially designed for the crushing of pipe materials, which is convenient for the crushing of long-shaped pipes and improves work efficiency. The optional suction fan and storage barrel can be used to form a pipe crushing and recycling system, which can give full play to the recycling efficiency.
1. The plastic crusher and power unit should be installed firmly. If the plastic crusher needs to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher needs to be flown, the unit should be installed on the frame made of angle iron, and ensure that the power engine (diesel engine or electric motor) and plastic The pulley grooves of the crusher are in the same rotation plane.
2. After the plastic crusher is installed, check the fastening of each fastener, and tighten it if it is loose. At the same time, check whether the belt tightness is appropriate.
3. Before starting the plastic crusher, first turn the rotor by hand to check whether the operation of the claws, hammers and the rotor is flexible and reliable, whether there is any collision in the crushing chamber, whether the rotation direction of the rotor is consistent with the direction indicated by the machine arrow, and whether the power machine and the Whether the plastic crusher is well lubricated.
4. Do not replace the pulley casually, in case the speed is too high to cause the crushing chamber to explode, or the speed is too low to affect the working efficiency of the pulverizer.
5. After the plastic crusher is started, it should be kept idling for 2~3 minutes, and there is no abnormal phenomenon before feeding work.
6. Pay attention to the operation of the plastic crusher at any time during the work. First, the feeding should be uniform to prevent the crushing chamber from being blocked; secondly, do not overload the work for a long time. If it is found that there is vibration, noise, high temperature of the bearing and the body, and material spraying out, it should be stopped immediately for inspection, and the work can be continued after troubleshooting.
ACERETECH is a creative company, focusing on the technology R&D of Plastics recycling and providing the equipments and solutions for Plastics recycling, washing and re-granulation. If you are looking for plastic crusher for your industry, please do not hesitate to contact us.